Victron Settings

Victron DC-DC Charger Settings for Wattcycle LiFePO4 Battery

here’s a detailed guide to optimize Victron charger settings for safety and performance:

1. Core Parameter Settings

2. Advanced Configuration

• Battery Type: Select LiFePO4 (3.2V) to enable CC/CV charging.
• Equalization: Disable (BMS manages minor imbalances).
• Charging Steps:
  1. Bulk Charge: Not set separately
  2. Absorption: Constant voltage (CV) at 14.4V until current drops to 5A.
  3. Float: diabled

3. Performance & Safety

• Charging Time:
  • At 70A: ~2.5 hours to 80% SOC (150Ah × 0.8 / 70A = 1.71 hours).
  • At 30A (CV phase): ~4.5 hours to full charge.
• Thermal Management:
  • Monitor battery temperature during charging; derate current if >45°C.

Summary of Victron Settings